History
Products
Axial Bumpers
GBA bumpers and GBA-S bumpers offer a high energy absorbing bumper with less travel. These Axial bumpers are ideal for use in Construction, Agricultural, Packaging equipment, Automation and Robotic applications or any application where the energy of motion needs to be controlled.
GBA Bumpers
GBA bumpers are made from our proprietary TecsPak® material. Tests have shown that TecsPak® is 10 times more durable than rubber and 20 times more durable than urethane. GBA bumpers are inert and performance is not affected by dirt, oils and other chemicals. Which makes them the ideal bumper for any application involving shock absorption or collision protection.
GBA-S Bumpers
GBA-S bumpers are made from our proprietary TecsPak® material. Tests have shown that TecsPak® is 10 times more durable than rubber and 20 times more durable than urethane. GBA-S bumpers are inert and performance is not affected by dirt, oils and other chemicals. Which makes them the ideal bumper for any application involving shock absorption or collision protection.
Micro Bumpers
Any application involving shock absorption or collision protection is suitable for using TecsPak Micro Bumpers. TecsPak bumpers far exceed the life of rubber and urethane bumpers and its performance is not affected by dirt, oils and other chemicals.
Blast Hole Drill Accessories
Miner Elastomer Products has available a line of TecsPak® roller bearings for Blast Hole Drill Rigs. The TecsPak® roller bearings are designed to stabilize the roller assembly as it travels up and down within the cradle.
Conveyor Rollers
EU-ROLLERS are more ENERGY EFFICIENT, more DURABLE and more COST EFFECTIVE than traditional rollers! EU-ROLLER uses quality bearings chosen to meet the requirements of any loading or transporting application. In order to protect and provide longevity for the bearings EU-ROLLER uses our proven patented bearing cap and seal design which contains special seals. These rollers also meet the CEMA 502-2016 standard!
Crane Bumpers
TecsPak crane bumpers are a proven, cost-effective choice for energy management systems with excellent resistance to chemicals and humidity. These bumpers are designed to meet the minimum requirements of existing industry standards – OSHA and CMAA.
E Springs
TecsPak Elastomer springs (E-Spring) offer a lower cost of ownership than standard steel coiled springs of comparable size. E-Springs are a cost effective choice for energy management systems with superior resistance to chemicals, oil and grease. Superior durability cuts down on maintenance for increased productivity. Design flexibility ranges from light loads to high end loads. Applications can be found throughout the industrial automation markets.
Heavy Duty Pads & Overtravel Rings
Miner Elastomer Products has a wide variety of TecsPak® heavy-duty pads designed to absorb impacts of all sizes. TecsPak® heavy-duty pads are virtually maintenance free and help decrease down-time of all types of heavy duty mining equipment. TecsPak® heavy-duty pads are inert to most chemicals, greases and oils. They do not delaminate, dry rot, or flake apart. Contact the factory today with your application requirements.
Heavy Radial Bumpers
Heavy Radial Bumpers (HRB) are ideal of application that require high loads and limited travel. These bumpers are well suited for applications in Agricultural, Construction and Mining equipment.
Mining Shovel Components
Miner Elastomer Products offers a large line of TecsPak® mining shovel components designed to improve performance, reduce downtime due to maintenance and increase shovel output. Our TecsPak® shovel components ability to absorb impacts result in longer life allowing for reduced shovel maintenance and overall lower operating cost.
Mining Truck Suspensions
Miner Elastomer Products has a large selection of TecsPak® haul truck complete suspension struts and replacement suspension packages (RMC). TecsPak® suspension packages are designed to handle severe loads in all environments.
Mining Truck Suspensions Underground
Miner Elastomer Products has a large selection of TecsPak® haul truck complete suspension struts and replacement suspension packages (RMC). TecsPak® suspension packages are designed to handle severe loads in all environments. MEPC’s suspensions are known to optimize your haul trucks performance by eliminating timely maintenance. By eliminating any required maintenance TecsPak® suspensions allow you to increase the availability of your trucks. These suspensions also don’t require any oil or nitrogen to operate them, because our TecsPak® pads do all the work!
Radial Bumpers
GBR-55 bumpers and GBR standard bumpers are ideal for applications that require longer travel and softer entry. These Radial bumpers are perfect for Seating and Industrial applications, Automation, Agriculture and Construction equipment.
GBR Bumpers
GBR bumpers are designed with long travel and lower load capability. These bumpers are perfect for seating and industrial applications, fitness equipment, automation, agriculture and construction equipment.
GBR-47 Bumpers
(NEW)
GBR-47 bumpers are made from our proprietary TecsPak® material. Tests have shown that TecsPak® is 10 times more durable than rubber and 20 times more durable than urethane. These bumpers are ideal for applications that require longer travel and softer entry. View Dimensional Summary
GBR-55 Bumpers
GBR-55 bumpers are made from our proprietary TecsPak® material. Tests have shown that TecsPak® is 10 times more durable than rubber and 20 times more durable than urethane. These bumpers are ideal for applications that require longer travel and softer entry.
GBR-71 Radial-in-Radial
(NEW)
GBR Radial-in-Radial bumpers are made from our proprietary TecsPak® material. Tests have shown that TecsPak® is 10 times more durable than rubber and 20 times more durable than urethane. These bumpers are ideal for applications that require longer travel and softer entry. View Dimensional Summary
Radial Tube Bumpers
Radial Tube Bumpers (RTB) are designed for low end-load applications (1,500 to 42,700 lbs. uniformly loaded) the radial tube bumpers are oval in shape and available in 6 to 42 inch lengths. Any application involving shock or collision protection is suitable for using TecsPak® Radial Tube Bumpers.
Sucker Rod Cushions
Sucker Rod Cushions are installed on Oil well pumping units. TecsPak® cushions are made from a highly engineered elastomeric product designed to absorb more energy per unit of weight and volume than most known materials. They are designed to absorb shock as the sucker rod is raised and lowered. Up to four pads of TecsPak® are fixed between steel plates and mounted on the top of the pumping unit’s hanger bar. The pads reduce rod vibration and shock on wells with peak polished rod loads up to 44,000 lb (196 kN). Each pad measures approximately 6 in. in diameter by 3 to 5 in. high.
TecsPak® Rectangular Bumper
TecsPak® Rectangular Bumper (TRB) are designed for applications with moderate travel and end load. TRB bumpers are also useful as end of travel stops for heavy loads. Our TRB bumpers are available in various sizes at a standard length and are easily installed with two mounting bolts and washers. These elastomer bumpers can be found on garbage trucks, fire trucks, and even utility trucks. TecsPak® Rectangular bumpers are ideal for any industrial application to prevent metal on metal contact and will absorb more energy compared to other energy absorbing materials. TRB’s will provide unmatched performance for your application.
Wheel Chocks
ImPak™ wheel chocks are designed for over-the-road trucks and large mining haul trucks. Tough ImPak™ wheel chocks are virtually indestructible and suited for all types of environments. All ImPak™ wheel chocks are made from high-visibility orange ImPak™ material.
Custom Applications
Technical Data
Certifications and Associations
TecsPak Features
Warranty
TecsPak Warranty
TecsPak® Suspension Warranty
Quality Policy
Terms and Conditions
Industries
Media Relations
Events
Catalogs
Contact Us
English
Spanish
1 800 216 20 20
