Miner Elastomer Products Corporation is proud to serve the following industries:
Miner Elastomer Products Corporation is ITAR Registered and is an original equipment manufacturer to the US Military. Our engineering team works directly with the military to develop custom high energy jounce bump stops, deck isolation and instrument vibration stops. We have an array of over 160 standard off the shelf bumpers that are used in the industry worldwide. TecsPak’s® ability to far exceed the performance of rubber and urethane makes it the perfect energy management solution.
Miner Elastomer Products Corporation is ISO9001-2015 registered and is an original equipment manufacturer to many Agriculture equipment manufacturers. We have an array of over 160 standard off the shelf bumpers that are used in the industry worldwide. TecsPak® is waterproof, UV protected and impervious most chemical, greases and oils. These characteristics make TecsPak® the leading choice over rubber and urethane. TecsPak® will not dry rot, crack or fall apart. From plows to sprayers, wherever there is motion of energy that needs to managed or controlled, TecsPak® is your solution.
Miner Elastomer produces shock absorbing products that are made for treadmills, ellipticals, and weight lifting machines. Miner Elastomer is considered to be the go-to manufacturer of shock absorption pads for the top manufacturers in the health and fitness industry.
One of our most relied upon products in this market is our radial bumpers. This bumper is designed for applications in which long, soft energy absorption is required. MEPC’s radial bumpers are easily installed into the equipment and have minimum end load with maximum stroke.
Another key product in this market is our proprietary TecsPak® E-Springs, which offer numerous advantages over conventional rubber, polyurethane, and coiled steel springs. They provide significantly greater energy absorption per weight and volume, along with superior endurance and resilience. Our E-Springs are also 1/3 the weight of steel springs and are as cost-effective as they are reliable.
LAWN & GARDEN EQUIPMENT
Miner Elastomers’ TecsPak® GBR and GBA bumpers are featured on numerous different types of lawn equipment in the green industry.
Our radial bumpers can replace the steel seat coils/springs for a smoother and quieter ride. These bumpers are used when there is a need for continuous and soft energy absorption. Radial bumper can be easily installed and a screw mounts this bumper to any surface where the energy of motion needs to be controlled.
Our axial bumpers can be used in the suspension of the lawn mower and it absorbs shock similarly to the way it works in a car’s suspension. These bumpers provide isolation in the deck suspension due to their ability to endure a higher load capacity. Axial bumpers also provides a smoother ride and reduces stress and strain on the knees and joints of the operator.
Miner Elastomer Products is a manufacturer of high-quality suspension and shovel components for the mining industry. Our proprietary TecsPak® material gives our customers significant improvements in their product life cycle by improving performance, reducing downtime at the mines and increasing haul truck & shovel output.
MEPC® is a Direct OEM Tier 1 supplier for the mining industry and our products include shovel components, wheel chocks, heavy-duty pads & overtravel rings, TecsPak® crane bumpers and heavy radial bumpers.
TecsPak® bumpers have been used on construction equipment as steering stop pads along with seat suspensions and back hoe locking pads. MEPC® is ISO9001-2015 registered and is a direct OEM supplier to many of the major construction equipment manufactures. Many of our standard radial and axial bumpers are used in this demanding industry. Continuous exposure to the environment will cause no degradation to the performance of the bumpers and TecsPak® outperforms rubber and urethane in these application. From dozers to dump trucks, wherever there is motion of energy that needs to managed or controlled, TecsPak® is your solution.
Miner Elastomer Products is a tier 2 supplier to the automotive industry and is ISO9001-2015 registered. Our TecsPak® over travel stops and rebound bumpers have been used by shock and strut manufactures for centuries. Our engineers are capable of developing custom TecsPak® bumpers to meet the demanding requirements of the Automotive industry. TecsPak® is not affected by oil or grease and tests have proven that TecsPak is 10 times more durable than rubber and 20 times more durable than urethane.
Miner Elastomer Products design engineers will work directly with you to develop custom parts to meet your application requirements for an array of industries. Our engineers continue to find innovative ways to use TecsPak® to solve our customers’ energy management problems. For more information regarding our custom parts please click here.